Remso Control Technologies Private Limited

Greater Noida, Gautam Buddha Nagar, Uttar Pradesh

GST No. 09AABCR8577R1Z9

Send Email
0804897101867% Response Rate
Search

Home » Our Products » Hydraulic Arm Manipulator Scrap Pusher Poker


Hydraulic Arm Manipulator Scrap Pusher Poker

Scrap Poker Arm Manipulator

The Remso Induction Furnace Arm Manipulator designs incorporates horizontal movement, forward and reversemovement of the telescopic armand a large bearing base for swing movement forRotating or Swing of the arm to the left and right of center and extended travel to a parking position. The vertical movements of the Poking Probe attached with the telescopic boom is carryout by the hydraulic cylinder.

Remso Hydraulic ScrapPusher consists ofRotary column assembly, Swing bearing, External boom assembly, internal boom assembly, Rotary GearedMotor, Lifting cylinder, Push-pull cylinder, Hydraulic Power pack, Electric control system.


Hydraulic Manipulator arm for induction furnace

REQUEST CALLBACK

Hydraulic Manipulator arm for induction furnace
  • Hydraulic Manipulator arm for induction furnace
  • Hydraulic Manipulator arm for induction furnace
  • Hydraulic Manipulator arm for induction furnace
  • +3 Hydraulic Manipulator arm for induction furnace
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 9.5 Lakh / UnitGet Latest Price

Product Brochure
Product Details:
Minimum Order Quantity1 Unit
MaterialMS
Power ConsumptionAs per customer requirement
Automation GradeAutomatic
Production Capacity30 Per Year
Power SourceAs per customer requirement
TechniqueAuto
Usage/ApplicationFor Induction Furnace
TypeAuto
ThicknessAs per customer requirement
ColorAs per customer requirement
LocationGraeter Noida
Surface FinishingAs per customer requirement
ConditionNew
Country of OriginMade in India

Hydraulic Manipulator arm for induction furnace. It is used to push the raw material into the induction furnace with the help of manipulator arm. It reduced the cycle time approx. 20 minutes.

Many steelmakers use hand shovel for poking Scrap into the Furnace. Such shovel involve risks for the steel shop worker. Poking activities can now be performed using a new development from REMSO CONTROL TECHNOLOGIES PVT. LTD. – an automatic device for POKING in during melting. This new development both significantly increases safety and provides a communally attractive solution.

Hydraulic Poker

Poker is used to push the scrap into the furnace during melt down operation. Scrap poker is mounted on column and remote controlled through the control desk. The Hydraulic system is controlled by solenoid  and is used for boom operation which helps with maximum working range. A toothed gear slewing ring with an electric motor is used for rotation. On customer requirements One or two pokers with a common hydraulic system can be used for one set of induction melting systems having one Power Supply Unit and two Furnaces.

Rotational Transmission: The axial rotation movement of a column using a slewing bearing with a geared motor to ensure jerk-free operation.

Boom operation for up/down & forward/backward movement by hydraulic cylinders ensures highest pressing force on charged material.

Structural components:

Boom is double web fabricated robust box type design with arrangement for easy replacement of poking rod. The end part can be separated from the boom, and easily replaceable without dismantling the complete boom. The Boom designed by Remso has telescopic sliding mechanism to adjust the poking road in the centre of the furnace. The Hydraulic cylinders designed to operate in harsh temperature conditions. The poking rod can be easily detachable.

 

Column:

  • Fabricated using a high-strength steel plate.
  • Hydraulic cylinders are designed to work at high temperatures for operating boom up & down. 
  • Slewing ring with high tilting moment withstands capacity for easy movement of column ensuring high service life.

Base Frame:       

  • Fabricated using high-strength structural steel sections.
  • Sufficient base area to withstand high tilting moment.

Additional Information:

  • Item Code: RCTPL_Poker
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Advance
  • Production Capacity: 30 Nos. per year
  • Delivery Time: 15 days
  • Packaging Details: Transport Worthy
  • Yes! I am Interested

    Hydraulic Poking Machine

    REQUEST CALLBACK

    Hydraulic Poking Machine
    • Hydraulic Poking Machine
    • Hydraulic Poking Machine
    • Hydraulic Poking Machine
    • +3 Hydraulic Poking Machine
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 12.5 Lakh / PieceGet Latest Price

    Product Brochure
    Product Details:
    Minimum Order Quantity1 Piece
    MaterialREMSO
    Max Temperature (degree Celsius)1500-2000 degree Celsius, 1000-1500 degree Celsius
    Automation GradeAutomatic
    Melting Time (min)on request
    Usage/ApplicationFor Pressing the Scrap into Induction Furnace Crucibles
    Melting MaterialScrap
    Dimension (Inch)as per customer requirement
    ConditionNew
    Country of OriginMade in India

    Poker Arm manipulator for Induction Furnace

    Remso offer Scrap Poker is used to push the scrap into the furnace during melting operation. Scrap poker is column-mounted and controlled remotely through the control desk. Solenoid controlled hydraulic system is used for boom operation which helps with maximum working range. A toothed gear slewing ring with an electric motor is used for rotation. Normally two pokers with a common hydraulic system are used for one set of induction melting systems having one Power Supply Unit and two Furnaces. 
    For more details please contact


    Additional Information:

  • Production Capacity: 20
  • Delivery Time: 30 days
  • Yes! I am Interested

    Hydraulic Scrap Pusher

    REQUEST CALLBACK

    Hydraulic Scrap Pusher
    • Hydraulic Scrap Pusher
    • Hydraulic Scrap Pusher
    • Hydraulic Scrap Pusher
    • +2 Hydraulic Scrap Pusher
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 16 Lakh / SetGet Latest Price

    Product Brochure
    Product Details:
    Minimum Order Quantity1 Set
    Capacity(tons)5-10 ton, 10-15 ton
    Usage/ApplicationIndustrial
    FeaturesPUSHER
    ColorYellow
    Country of OriginMade in India

    Remso offer Hydraulic Pusher of optimum quality.

    Hydraulic Scrap Pusher system feature an innovative, rugged design to help minimize time-consuming tasks on the melt deck, improve furnace utilization and maintain the integrity of Initiated metal castings.

    Features

    Ø Remote Controlled

    Ø Cost Effective

    Ø Safe and ease operation

    Ø Save time

    Ø Increase No. of Heats

    Ø Save man power

    Ø Economical payback period

    Ø Enhance productivity

    Ø Save power consumption

    Ø Smooth operation without affecting the Pollution Control System / FES System

    Ø Non skilled workers can run the machine

    Ø Easy to install

    Ø Less space required for installation

    Ø Technical Specifications

    Ø Hydraulic Scrap Pusher for 4 MT to 50 MT Induction Furnace Capacity

    Ø Range: 3 Meter to 09 Meter Length

    Ø Working type: It can be extendable or non-extendable

    Ø It can be used for both the crucibles

    Ø Hydraulic Operated

    Ø It can be revolve 360 degree

    Ø Manufactured with planetary Gears and Motors

    Ø Boomer of Heat resistance steel

    Ø Maximum power required 10 to 30 HP

     


    Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Ex Works
  • Production Capacity: 24
  • Delivery Time: 30 DAYS
  • Packaging Details: AS PER STANDARD
  • Yes! I am Interested

    Hydraulic Pusher for Induction Furnace

    REQUEST CALLBACK

    Hydraulic Pusher for Induction Furnace
    • Hydraulic Pusher for Induction Furnace
    • Hydraulic Pusher for Induction Furnace
    • Hydraulic Pusher for Induction Furnace
    • +4 Hydraulic Pusher for Induction Furnace
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 14 Lakh / PieceGet Latest Price

    Product Brochure
    Product Details:
    Minimum Order Quantity1 Piece
    Usage/ApplicationPushing Scrap in crucible
    Melting Materialscrap
    Automation GradeAutomatic
    TypeAutomatic
    SizeAs per customer requirement
    TechniqueTelescopic boom for forward and reverse movement
    Max Temperature (degree Celsius)>2500 degree Celsius

    Remso Induction Furnace Hydraulic pusher is compact and sturdy in design. It helps to minimize time to push the melt deck. The furnace utilization is maximised and maintain the integrity of metal castings. Hydraulic Scrap Pusher for Induction Furnace control the pressure of up-down cylinder, retract and forward telescopic boom, Rotating Column power drive and Control unit.

     

    Application and Uses

    • Push the scrap inside the Induction furnace.

    • Increase the density of scrap.

    • Increase lifetime of the machine through special designed machine and telescopic boom, such as a completely closed boom for the protection of the inner components against the radiation of heat and any falling object.

    • The down time of the Induction furnace crucible jam is extremely reduced.

    • The availability of the furnace is raised enormously.

    • Energy costs are reduced through less heat loss.

    • Reduced wear on refractory material through precise working.

    • Increased protection of the operator through working from a higher distance to the hot area and optimised safety equipment.

    Yes! I am Interested

    Hydraulic Pusher for Induction Furnace

    REQUEST CALLBACK

    Hydraulic Pusher for Induction Furnace
    • Hydraulic Pusher for Induction Furnace
    • Hydraulic Pusher for Induction Furnace
    • Hydraulic Pusher for Induction Furnace
    • +4 Hydraulic Pusher for Induction Furnace
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 12.5 Lakh / NumberGet Latest Price

    Product Brochure
    Product Details:
    Minimum Order Quantity1 Number
    Usage/ApplicationIndustrial
    Product TypeIndustrial Machine
    Surface FinishingAs per customer requirement
    UsageExtending Arm Manipulator for 30 tons Furnace
    ColorAs per customers requirement
    SizeDifferent size As per customers requirement
    Amc After Sales ServiceYes
    AssemblyAssembled
    Capacity10 Ton
    Design TypeCustom Made
    Installation ProvidedYes
    ApplicationUsed to push the raw material into the induction furnace

    Remso offer Hydraulic pusher for Pressing Scrap into crucible of Induction Furnace.

    Hydraulic pusher is compact and sturdy in design. It helps to minimize time to push the melt deck. The furnace utilization is maximised and maintain the integrity of metal castings. Hydraulic Scrap Pusher for Induction Furnace control the pressure of up-down cylinder, retract and forward telescopic boom, Rotating Column power drive and Control unit.

    Application and Uses
    • Push the scrap inside the Induction furnace.
    • Increase the density of scrap.
    • ncrease lifetime of the machine through special designed machine and telescopic boom, such as a completely closed boom for the protection of the inner components against the radiation of heat and any falling object.
    • The down time of the Induction furnace crucible jam is extremely reduced
    • The availability of the furnace is raised enormously.
    • Energy costs are reduced through less heat loss.
    • Reduced wear on refractory material through precise working.
    • Increased protection of the operator through working from a higher distance to the hot area and optimised safety equipment.

    Additional Information:

  • Port of Dispatch: Ex - works
  • Production Capacity: 100
  • Delivery Time: 15 days
  • Yes! I am Interested

    Scrap Pusher for Induction Furnace

    REQUEST CALLBACK

    Scrap Pusher for Induction Furnace
    • Scrap Pusher for Induction Furnace
    • Scrap Pusher for Induction Furnace
    • Scrap Pusher for Induction Furnace
    • +5 Scrap Pusher for Induction Furnace
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 14.5 Lakh / PieceGet Latest Price

    Product Brochure
    Product Details:
    Minimum Order Quantity1 Piece
    Usage/ApplicationFor pushing Scrap in Induction Furnace
    Product TypeIndustrial
    Surface FinishingMetalic
    Working Pressure120
    ModelRemso Poker

    REMSO Scarp Pusher is mounted on support structure, which moves forward from a parking position to the Pushing position and retract to parking position. Cartridges will be replaced manually in the parking position besides the furnace.


    The REMSO Scrap Poking machine is designed to satisfy following demands:

    · Increased operational safety

    · Unhindered operation on the platform

    · Integration in existing equipment

    · Compact and reliable design

    · Electro Hydraulic driven

    · Long lifetime and almost maintenance free operation.

    · Stroke of up to approx. 1.3 to 1.8 meter.

    · Position control by encoder.

    · Wired to terminal box or fully equipped with automation system based on PLC in main control cabinet, with local control box and optional remote control panel.

    The specification of equipment may change as per customer specific requirements and conditions. The changes will be specified in the pre-engineering report.


    Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Production Capacity: 12
  • Delivery Time: 1 months
  • Yes! I am Interested

    Furnace Scrap Poker

    REQUEST CALLBACK

    Furnace Scrap Poker
    • Furnace Scrap Poker
    • Furnace Scrap Poker
    • Furnace Scrap Poker
    • +6 Furnace Scrap Poker
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 10 Lakh / pieceGet Latest Price

    Product Brochure
    Product Details:
    Minimum Order Quantity1 piece
    Material Loading Capacity1000 kg
    Power SourceElectric
    Max OperatingTemperatureMax Operation Temperature as pr requirement
    Power ConsumptionAs required
    Interior Dimension (LxBxH)Customer requirement
    Exterior Dimension (LxBxH)Customer Requirement
    Automation GradeAutomatic
    Country of OriginMade in India

    Scrap Poker is used to push the scrap into the furnace during melting operation. 

    •It is very safe as its a complete remote control device as it increases protection if the operator working from a distance to the hot area and optimised safety equipment. •Increase life of the machine through special design telescopic boom, such as a completely closed boom for the protection of the inner component against the radition of heat and any falling object. •Energy costs are reduced through less heat loss. •It save crane breakdown. •Increase the density of scrap. •The down time of the induction furnace crucible jam is extremely reduced. •The availability of the furnace is raised wnormously. •Reduced wear on refactory material through precise working.

    Additional Information:

  • Item Code: RCTPL_FSP_2023
  • Production Capacity: 30
  • Delivery Time: 15 days
  • Yes! I am Interested

    Hydraulic Arm Manipulator For Induction Furnace

    REQUEST CALLBACK

    Hydraulic Arm Manipulator For Induction Furnace
    • Hydraulic Arm Manipulator For Induction Furnace
    • Hydraulic Arm Manipulator For Induction Furnace
    • Hydraulic Arm Manipulator For Induction Furnace
    • +1 Hydraulic Arm Manipulator For Induction Furnace
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 12.9 Lakh / PieceGet Latest Price

    Product Brochure
    Product Details:
    Minimum Order Quantity1 Piece
    Model Name/NumberREMSO-SP
    Make/BrandRemso
    Automation GradeAutomatic
    MaterialStainless Steel
    Brand/MakeREMSO
    SizeCustomized
    DiameterCustomized
    Usage/ApplicationTo push Scrap into the induction Furnace
    Max Temperature (degree Celsius)>2500
    DesignAs per customer requirement
    Country of OriginMade in India

    Poker Arm manipulator for Induction Furnace

    Remso offer Hydraulic Arm manipulator for Induction Furnace to push Scrap in to the crucible. This reduces the melting cycling time by 15% to 20%. The design incorporates telescopic boom with vertical pushing Probe and a large bearing base for swing movement. The REMSO Arm Manipulator is mounted on column support structure, which forward from a parking position to the Pushing position and retract to parking position. Cartridges will be replaced manually in the parking position besides the furnace.

     


    Additional Information:

  • Production Capacity: 24
  • Delivery Time: 15 days
  • Yes! I am Interested

    POKER for Induction Furnace

    REQUEST CALLBACK

    POKER for Induction Furnace
    • POKER for Induction Furnace
    • POKER for Induction Furnace
    • POKER for Induction Furnace
    • +6 POKER for Induction Furnace
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 14 Lakh / SetGet Latest Price

    Product Brochure
    Product Details:
    Minimum Order Quantity1 Set
    Material Loading Capacitymore than 1000 Kg
    Melting MaterialScrap
    Max Operating TemperatureMore Than 1500 degree Celsius
    Power SourceElectric
    Type Of FurnaceInduction
    Melting TimeReduced melting time
    DesignCompact and Robust design
    TechniqueAutomatic with telescopic boom
    Max Temperature (degree Celsius)>2500 degree Celsius

    Remso Hydraulic poker features an innovative, rugged design to help minimize time-consuming tasks on the melt deck, improve furnace utilization and maintain the integrity of Initiated metal castings.

     

    The automated Hydraulic Pushing device supplied by REMSO CONTROL TECHNOLOGIES PVT. LTD eliminates the need for workers to stand in dangerous areas in front of the Furnace for the purpose of Poking Scrap. The Scrap Poking process is standardized to ensure reproducible operation and results. The Poker Arm system is mounted on a swiveling device which optimizes space requirements in front of the Induction Furnace.

     

    Yes! I am Interested

    Hydraulic Scrap Poker for Induction Furnace

    REQUEST CALLBACK

    Hydraulic Scrap Poker for Induction Furnace
    • Hydraulic Scrap Poker for Induction Furnace
    • Hydraulic Scrap Poker for Induction Furnace
    • Hydraulic Scrap Poker for Induction Furnace
    • +8 Hydraulic Scrap Poker for Induction Furnace
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 12 Lakh / pieceGet Latest Price

    Product Brochure
    Product Details:
    Minimum Order Quantity1 piece
    Material Loading Capacity1000 kg
    Power SourceHydraulic
    Type Of FurnaceTilt
    Country of OriginMade in India

    Scrap Poker is used to push the scrap into the furnace during melting operation. Scrap poker is column-mounted and controlled remotely through the control desk. Hydraulic system is used for boom operation which helps with maximum working range. A toothed gear slewing ring with an electric motor is used for rotation. 
    • Boom is with a telescopic sliding mechanism to adjust the poking road in the center of the furnace.
    • Hydraulic cylinders are capable to operate in high temperature conditions.
    • Easily replaceable poking rod.
    • Hydraulic cylinders are designed to work at high temperatures for operating boom up & down. 
    • Base area is made to withstand high tilting moment.

    Additional Information:

  • Production Capacity: 30
  • Delivery Time: 15 days
  • Yes! I am Interested

    Forging Manipulator

    REQUEST CALLBACK

    Forging Manipulator
    • Forging Manipulator
    • Forging Manipulator
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 50 Lakh / PieceGet Latest Price

    Product Details:
    Minimum Order Quantity1 Piece
    Country of OriginMade in India

    Remso offer forging manipulators up to 40 tons pay load were Design, manufactured as per the clients drequirements.
    PLC system : CPU S7 – 400 (SIEMENS)
     
    Technical specification
     
    Load-Carrying Capacity : 500 KN
    Tongs Opening : 200 – 2,800 mm
    Tong Height : 1,800 ~ 3,300 mm
    Overall Length : 16,500 mm
    Overall Width : 5,700 mm
    Overall Height : 5,900 mm
    Horizontal Movement : ± 300 mm
    Tiling Angle : UP 15
    Forging Speed : 0 ~ 30 m / min
    Traveling Speed : 0 ~ 50 m / min
    Turning Speed : 0 ~ 8 RPM
    Clamping Speed : 70 mm / sec
    Travel Distance : 26,000 mm .

    Additional Information:

  • Production Capacity: 1
  • Delivery Time: 180 day
  • Yes! I am Interested

     
    X


    Explore More Products

    Contact via E-mail
    Contact via SMS
    Rahul Ranjan (Manager)
    Remso Control Technologies Private Limited
    Plot No. D-157, Export Promotion Industrial Park, Site 5
    Greater Noida - 201308, Gautam Buddha Nagar, Uttar Pradesh, India
    Call Us: 
    Call Response Rate: 67%
    Share Us :



    Home  |   Company Brief   |  Our Products  |  Site Map  |   Contact Us

    © Remso Control Technologies Private Limited. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited

    Remso Control Technologies Private Limited