SLAG DESTROYING MACHINE
OPERATION DESCRIPTION
General
The Furnace Tending Vehicle is used for carrying out the following tending and maintenance operations on the holding furnaces in the cast house.
v Skimming-off slag skulls of the ladle mouth and Dross from the liquid metal Surface.
v Stirring the liquid metal, alloying metals and fluxes perfectly.
v Dosing of degassing in the liquid metal with special tool.
v Demolishing of old refractory brick lining.
v Chipping out the top of steel ladle in 1000°C.
v Destroying/ Demolition of the refractory bricks of steel and cast iron ladles.
v Removing and fixing of the porous plug located on the bottom of steel ladle in hot condition.
v Changing the inner cup of steel ladle in hot condition.
v Stirring the liquid metal to mix alloying metals and fluxes perfectly.
v Chiseling and removing the Slag and Dross built up on the furnace lining and furnace hearth, de
bricking using special breaking attachments.
v Mouth Jam Cleaning in hot conditions.
The furnace tending vehicle is equipped with under carriage mounted on crawler with flat shoes. The upper – structure is attached with a 2 section telescopic boom with various tending attachment shall be rigged for above mentioned operations
Product Details:
Minimum Order Quantity | 1 Piece |
Material | Ladle Refractory |
Features | Diesel Engine - DEUTZ AG / CATERPILLAR / JCB / GE |
Brand | Remso |
Shelf Life | 5 year |
Country of Origin | Made in India |
This equipment is used for carrying out following operations in the furnaces in metallurgical industries.
Ø Skimming-off slag skulls of the ladle mouth and Dross from the liquid metal Surface.
Ø Chipping out the top of steel ladle in 1000°C.
Ø Chipping put the slag hang to the bottom and body of the steel ladle in more than 1000°C.
Ø Destroying/ Demolition of the refractory bricks of steel and cast iron ladles.
Ø Removing of the porous plug located on the bottom of steel ladle in hot condition.
Ø Changing the inner cup of steel ladle in hot condition.
Ø Stirring the liquid metal to mix alloying metals and fluxes perfectly.
Ø Chiseling and removing the Slag and Dross built up on the furnace lining and furnace hearth, debricking using special breaking attachments.
Ø Mouth Jam Cleaning in hot conditions
Additional Information:
3.2/5
Rated by 30 Users